The set protocols dot1x aaa radius authentication server-ip acct-port command configures the UDP port of the RADIUS accounting server.

Command Syntax

set protocols dot1x aaa radius authentication server-ip <ipv4-address> acct-port <port-number>

Parameter

Parameter

Description

server-ip <ipv4-address>

Specifies IPv4 address of RADIUS authentication server.

acct-port <port-number>

Specifies UDP port of RADIUS accounting server. The value is an integer that ranges from 1 to 65535.

The default value is 1813.

Example

admin@Xorplus# set protocols dot1x aaa radius authentication server-ip 10.10.10.1 acct-port 5200
admin@Xorplus# commit

Browser not supported