set protocols dot1x filter sequence from destination-mac-address

NOTE:

This command is no longer supported from version 4.3.2, since this filter has been deprecated.

The set protocols dot1x filter sequence from destination-mac-address command configures the destination MAC address information of the matching packets based on the NAC-based ACL rules.

Command Syntax

set protocols dot1x filter <filter-name> sequence <sequence-number> from destination-mac-address <mac-address>

Parameter

Parameter	Description
filter <filter-name>	Specifies the ACL filter name. The value is a string.
sequence <sequence-number>	Specifies filter sequence number. The value is an integer that ranges from 0 to 9999.
destination-mac-address <mac-address>	Specifies the destination MAC address of packets that match ACL rules. The value is in the format of H:H:H:H:H:H. An H contains 2 hexadecimal numbers.

Example

Configure the destination MAC address of packets that match ACL rules to 10:50:ba:27:be:d2.

admin@Xorplus# set protocols dot1x filter f1 sequence 2 from destination-mac-address 10:50:ba:27:be:d2
admin@Xorplus# commit