run show rmon eventlog

The run show rmon eventlog command is used to view RMON event log information.

Command Syntax

run show rmon eventlog [<entry-index>]

Parameter

Parameter	Description
[<entry-index>]	Optional. Specifies the RMON event log table index. The value is an integer that ranges from 1 to 65535.

Example

View RMON event log information.

admin@PICOS# run show rmon eventlog
Entry 1 owned by monitor is VALID.
    Generates eventLog 1.1 at 0:01:19.
    Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarmEntry 1, equal or lesser than 1000000000 with alarm value 0.Alarm sample type is absolute.