set vlans vlan-id l3-interface
To associate a Layer 3 interface with a VLAN, use the set vlans vlan-id l3-interface command. To remove the Layer 3 interface, use the delete form of the command.
Command Syntax
set vlans vlan-id vlan-id l3-interface interface-name
delete vlans vlan-id vlan-id l3-interface
Parameters
vlan-id | VLAN identifier. The range of allowed VLAN identifiers is 1-4094. A range of VLAN identifiers can be used, for example, 2,3,4,5-100. |
interface-name | Name of the Layer 3 interface. |
Example
- This example associates a Layer 3 interface vlan-1 with VLAN 10 and then removes the Layer 3 interface from the VLAN:
admin@Switch# set vlans vlan-id 10 l3-interface vlan-1 admin@Switch# commit admin@Switch# delete vlans vlan-id 10 l3-interface admin@Switch# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.