PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.4.4_Configuration_Guide (Special Release)
All content
Space settings
Content
Results will update as you type.
Release Notes for PICOS 4.4.4 (Special Release)
Hardware Guides
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
PICOS Routing and Switching Command Reference
Command-Line Interface Commands
System Management Commands
VLAN Configuration Commands
Layer 3 Routing Commands
Voice VLAN Configuration Commands
ACL Configuration Commands
QoS Configuration Commands
class-of-service classifier <classifier-name>
class-of-service classifier <classifier-name> forwarding-class <forwarding-class-name> code-point <code-point>
class-of-service classifier <classifier-name> trust-mode <trust-mode>
class-of-service forwarding-class <forwarding-class-name> local-priority <local-priority>
class-of-service interface <port> classifier <classifier-name>
class-of-service scheduler <scheduler-name> guaranteed-rate <guaranteed-rate>
class-of-service scheduler <scheduler-name> mode SP
class-of-service scheduler <scheduler-name> mode WFQ
class-of-service scheduler <scheduler-name> mode WRR
class-of-service scheduler <scheduler-name> weight <weight-id>
class-of-service scheduler-profile <scheduler-profile-name> forwarding-class <forwarding-class-name> schedule <schedule-name>
show class-of-service <text>
set class-of-service interface scheduler-profile
class-of-service interface <port> default-priority <default-priority-type> <default-priority-int>
class-of-service pfc-profile <profile-name> code-point <code-point> drop <boolean>
class-of-service interface <port> pfc-profile <profile-name>
set firewall filter sequence then dscp
set class-of-service scheduler max-rate
CoPP Commands
set class-of-service forwarding-class local-priority
set class-of-service scheduler max-bandwidth-pps
set class-of-service scheduler min-bandwidth-pps
set class-of-service scheduler-profile copp-profile forwarding-classs scheduler
set class-of-service scheduler weight
set firewall filter copp sequence from destination-address-ipv4
set firewall filter copp sequence from destination-address-ipv6
set firewall filter copp sequence from destination-mac-address
set firewall filter copp sequence from destination-port
set firewall filter copp sequence from ether-type
set firewall filter copp sequence from protocol
set firewall filter copp sequence from source-address-ipv4
set firewall filter copp sequence from source-address-ipv6
set firewall filter copp sequence from source-mac-address
set firewall filter copp sequence from source-port
set firewall filter copp sequence from vlan
set firewall filter copp sequence then forwarding-class
set firewall filter copp sequence then dscp
run show copp bandwidth
run show copp statistics
run show filter copp
run show interface stm
run clear copp statistics
Buffer Management Commands
Interface-based Rate Limiting Commands
ACL-based Traffic Policer Commands
Protocol Configuration Commands
IP Multicast Commands
OpenFlow Commands in CrossFlow Mode
VXLAN Commands
BGP EVPN Commands
PoE Configuration Commands
VRRP Commands
Spanning Tree Protocol Commands
MLAG Commands
GRE Tunnel Interface Commands
GVRP Commands
MVRP Commands
ERPS Commands
EFM OAM Commands
Interface Configuration Commands
Loopback Detection Commands
PICOS Open vSwitch Configuration Guide
PICOS Open vSwitch Command Reference
Troubleshooting Guide
Blogs
You‘re viewing this with anonymous access, so some content might be blocked.
Close
PICOS-4.4.4_Configuration_Guide (Special Release)
/
set firewall filter copp sequence from ether-type
set firewall filter copp sequence from ether-type
Tracy Yang
Owned by
Tracy Yang
May 24, 2024
Loading data...