set protocols vrrp interface vrid ipv6-nd ra-interval
- Tracy Yang
The set protocols vrrp interface vrid ipv6-nd ra-interval command configures the maximum time allowed between sending unsolicited multicast router advertisements from the interface.
The delete protocols vrrp interface vrid ipv6-nd ra-interval command restores the default configuration.
Command Syntax
set protocols vrrp interface <interface-name> vrid <virtual-router-id> ipv6-nd ra-interval {msec <interval1> | sec <interval2>}
Parameter
Parameter | Description |
interface <interface-name> | Specifies the Layer 3 interface name of VRRP device. The value could be the VLAN interface name, the routed interface or the sub-interface name. The value is a string. |
vrid <virtual-router-id> | Specifies the VRID of a VRRP group. The value is an integer that ranges from 1 to 254. |
| msec <interval1> | Specifies the maximum time between sending unsolicited multicast router advertisements from the interface in milliseconds. The value is an integer that ranges from 70 to 1800000. Default: 600000. |
| sec <interval2> | Specifies the maximum time between sending unsolicited multicast router advertisements from the interface in seconds. The value is an integer that ranges from 1 to 1800. Default: 600. |
Example
- Configure the maximum time allowed between sending unsolicited multicast router advertisements from the interface.
admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 ipv6-nd ra-interval msec 600000 admin@Xorplus# commit
Related content
Copyright © 2025 Pica8 Inc. All Rights Reserved.