set protocols ethernet-oam interface remote-loopback timeout

The set protocols ethernet-oam interface remote-loopback timeout command configures the timeout for receiving remote loopback responding message. When times out, the EFM session state falls back to the DISCOVERY phase.

The delete protocols ethernet-oam interface remote-loopback timeout command deletes the configuration.

Command Syntax

set protocols ethernet-oam interface <interface-name> remote-loopback timeout <loopback-timeout>

delete protocols ethernet-oam interface <interface-name> remote-loopback timeout

Parameter

Parameter

Description

interface <interface-name>

Specifies an interface name. The value could be a physical interface.

timeout <loopback-timeout>

Specifies the timeout for remote loopback. The value is an integer, in seconds, that ranges from 1 to 10.

The default value is 3 seconds.

Example

Configure the timeout for remote loopback.

admin@PICOS# set protocols ethernet-oam interface te-1/1/19 remote-loopback timeout 9
admin@PICOS# commit