Interface Configuration Commands
This section contains descriptions of the CLI commands that this chapter references.
- interface aggregate-balancing hash-mapping field ethernet-destination-address disable
- interface aggregate-balancing hash-mapping field ethernet-source-address disable
- interface aggregate-balancing hash-mapping field ethernet-type disable
- interface aggregate-balancing hash-mapping field ingress-interface disable
- interface aggregate-balancing hash-mapping field ip-destination disable
- interface aggregate-balancing hash-mapping field ip-protocol disable
- interface aggregate-balancing hash-mapping field ip-source disable
- interface aggregate-balancing hash-mapping field port-destination disable
- interface aggregate-balancing hash-mapping field port-source disable
- interface aggregate-balancing hash-mapping field vlan disable
- interface aggregate-ethernet <lag_name> aggregated-ether-options flow-control
- interface aggregate-ethernet <lag_name> aggregated-ether-options min-selected-port
- interface aggregate-ethernet <lag_name> backup-port delay
- interface aggregate-ethernet <lag_name> backup-port interface
- interface aggregate-ethernet <lag_name> backup-port mode
- interface aggregate-ethernet <lag_name> crossflow enable
- interface aggregate-ethernet <lag_name> crossflow local-control
- interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling egress
- interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ether-type
- interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ingress
- interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling mode
- interface aggregate-ethernet <lag_name> family ethernet-switching native-vlan-id
- interface aggregate-ethernet <lag_name> hash-mapping mode
- interface aggregate-ethernet <lag_name> mtu
- interface aggregate-ethernet <lag_name> snmp-trap
- interface aggregate-ethernet <lag_name> static-ethernet-switching mac-address <macaddr> vlan
- interface aggregate-ethernet <lag_name> storm-control <mode> pps
- interface cut-through-mode
- interface ecmp max-path
- interface ethernet-switching-options buffer queue-limit
- interface ethernet-switching-options mac-table-aging-time
- interface gigabit-ethernet <port> backup-port delay
- interface gigabit-ethernet <port> backup-port interface
- interface gigabit-ethernet <port> backup-port mode
- interface gigabit-ethernet <port> crossflow enable
- interface gigabit-ethernet <port> crossflow local-control
- interface gigabit-ethernet <port> description
- interface gigabit-ethernet <port> disable
- interface gigabit-ethernet <port> ether-options flow-control
- interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling egress
- interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ether-type
- interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ingress
- interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling mode
- interface gigabit-ethernet <port> family ethernet-switching native-vlan-id
- interface gigabit-ethernet <port> family ethernet-switching vlan members <vlan-id> untagged
- interface gigabit-ethernet <port> link-fault-signaling ignore-local-fault <boolean>
- interface gigabit-ethernet <port> link-fault-signaling ignore-remote-fault <boolean>
- interface gigabit-ethernet <port> mac-learning <boolean>
- interface gigabit-ethernet <port> mtu
- interface gigabit-ethernet <port> power-preemphasis-level
- interface gigabit-ethernet <port> snmp-trap
- interface gigabit-ethernet <port> static-ethernet-switching mac-address <mac-address> vlan <vlan-id>
- interface gigabit-ethernet <port> storm-control <mode> kbps
- interface gigabit-ethernet <port> storm-control <mode> pps
- interface gigabit-ethernet <port> storm-control <mode> ratio <value>
- interface gigabit-ethernet <port> wred queue <value> drop_probability
- interface gigabit-ethernet <port> wred queue <value> ecn_thresh
- interface gigabit-ethernet <port> wred queue <value> enable
- interface gigabit-ethernet <port> wred queue <value> max_thresh
- interface gigabit-ethernet <port> wred queue <value> min_thresh
- interface max-acl-rule-limit <egress/ingress>
- interface max-route-limit
- IPv6 Neighbor Discovery Protocol Command Reference
- set l3-interface routed-interface ipv6-nd adv-interval-option
- set l3-interface routed-interface ipv6-nd home-agent-config-flag
- set l3-interface routed-interface ipv6-nd home-agent-lifetime
- set l3-interface routed-interface ipv6-nd home-agent-preference
- set l3-interface routed-interface ipv6-nd managed-config-flag
- set l3-interface routed-interface ipv6-nd mtu
- set l3-interface routed-interface ipv6-nd other-config-flag
- set l3-interface routed-interface ipv6-nd prefix off-link
- set l3-interface routed-interface ipv6-nd prefix preferred-lifetime
- set l3-interface routed-interface ipv6-nd prefix router-address
- set l3-interface routed-interface ipv6-nd prefix valid-lifetime
- set l3-interface routed-interface ipv6-nd ra-fast-retrans
- set l3-interface routed-interface ipv6-nd ra-interval
- set l3-interface routed-interface ipv6-nd ra-lifetime
- set l3-interface routed-interface ipv6-nd reachable-time
- set l3-interface routed-interface ipv6-nd router-preference
- set l3-interface routed-interface ipv6-nd suppress-ra
- set l3-interface vlan-interface ipv6-nd adv-interval-option
- set l3-interface vlan-interface ipv6-nd home-agent-config-flag
- set l3-interface vlan-interface ipv6-nd home-agent-lifetime
- set l3-interface vlan-interface ipv6-nd home-agent-preference
- set l3-interface vlan-interface ipv6-nd managed-config-flag
- set l3-interface vlan-interface ipv6-nd mtu
- set l3-interface vlan-interface ipv6-nd other-config-flag
- set l3-interface vlan-interface ipv6-nd prefix off-link
- set l3-interface vlan-interface ipv6-nd prefix preferred-lifetime
- set l3-interface vlan-interface ipv6-nd prefix router-address
- set l3-interface vlan-interface ipv6-nd prefix valid-lifetime
- set l3-interface vlan-interface ipv6-nd ra-fast-retrans
- set l3-interface vlan-interface ipv6-nd ra-interval
- set l3-interface vlan-interface ipv6-nd ra-lifetime
- set l3-interface vlan-interface ipv6-nd reachable-time
- set l3-interface vlan-interface ipv6-nd router-preference
- set l3-interface vlan-interface ipv6-nd suppress-ra
- L3 Interface
- run clear l3-interface statistics
- run show l3-interface
- run show l3-interface loopback
- run show l3-interface routed-interface
- run show l3-interface vlan-interface
- set l3-interface loopback address
- set l3-interface loopback disable
- set l3-interface loopback vrf
- set l3-interface routed-interface address
- set l3-interface routed-interface description
- set l3-interface routed-interface dhcp
- set l3-interface routed-interface mtu
- set l3-interface routed-interface pmtu-discovery
- set l3-interface routed-interface rate-limit
- set l3-interface routed-interface vrf
- set l3-interface vlan-interface address prefix-length
- set l3-interface vlan-interface dhcp
- set l3-interface vlan-interface mtu
- set l3-interface vlan-interface pmtu-discovery
- set l3-interface vlan-interface rate-limit
- set l3-interface vlan-interface vrf
- Port Security Commands
- run clear port-security dynamic address
- run clear port-security dynamic interface
- run clear port-security port-error
- run clear port-security sticky address
- run clear port-security sticky interface
- run show port-security address
- run show port-security brief
- run show port-security interface
- set interface ethernet-switching-options port-error-discard timeout
- set interface gigabit-ethernet port-security block
- set interface gigabit-ethernet port-security mac-address vlan
- set interface gigabit-ethernet port-security mac-limit
- set interface gigabit-ethernet port-security sticky
- set interface gigabit-ethernet port-security violation
- Routed Interface
- run show interface routed-interface brief
- run show vlans routed-vlan
- set interface aggregate-ethernet routed-interface enable
- set interface aggregate-ethernet routed-interface name
- set interface aggregate-ethernet routed-interface sub-interface vlan-id
- set interface gigabit-ethernet routed-interface enable
- set interface gigabit-ethernet routed-interface name
- set interface gigabit-ethernet routed-interface sub-interface
- set vlans reserved-vlan
- run show interface diagnostics tdr
- run show interface port-index-mapping
- set interface aggregate-ethernet
- set interface aggregate-ethernet aggregated-ether-options lacp
- set interface aggregate-ethernet aggregated-ether-options lacp fallback enable
- set interface aggregate-ethernet aggregated-ether-options lacp fallback timeout
- set interface aggregate-ethernet description
- set interface aggregate-ethernet disable
- set interface aggregate-ethernet family ethernet-switching port-mode
- set interface aggregate-ethernet family ethernet-switching vlan members
- set interface bpdu-tunneling destination-mac
- set interface ecmp hash-mapping field ingress-interface disable
- set interface ecmp hash-mapping field ip-destination disable
- set interface ecmp hash-mapping field ip-protocol disable
- set interface ecmp hash-mapping field ip-source disable
- set interface ecmp hash-mapping field port-destination disable
- set interface ecmp hash-mapping field port-source disable
- set interface ecmp hash-mapping field vlan disable
- set interface gigabit-ethernet auto-speeds
- set interface gigabit-ethernet breakout
- set interface gigabit-ethernet cdr
- set interface gigabit-ethernet duplex auto
- set interface gigabit-ethernet ether-options 802.3ad
- set interface gigabit-ethernet family ethernet-switching bpdu-tunneling protocol
- set interface gigabit-ethernet family ethernet-switching port-mode
- set interface gigabit-ethernet family ethernet-switching vlan members
- set interface gigabit-ethernet fec
- set interface gigabit-ethernet speed
- set interface gigabit-ethernet up-mode
- set management-ethernet-speed eth0
- show interface aggregate-ethernet <lag_name>
- show interface aggregate-ethernet <lag_name> dot1q-tunneling
- show interface bpdu-tunneling
- show interface brief
- show interface detail
- show interface diagnostics optics all
- show interface ecmp max-path
- show interface flexlink
- show interface gigabit-ethernet <interface>
- Uplink Failure Detection Commands
Copyright © 2024 Pica8 Inc. All Rights Reserved.