set system aaa ldap vrf mgmt-vrf

Owned by Tracy Yang
Jun 13, 2024
1 min read

The set system aaa ldap vrf mgmt-vrf command configures to run the AAA LDAP protocol in management VRF.


Command Syntax

set system aaa ldap vrf mgmt-vrf


Parameter

None.


Usage Guidelines

LDAP protocol runs in the default VRF by default, and supports to be configured in the management VRF. The corresponding LDAP server is required to be route reachable in the VRF running LDAP protocol.

Note: The latest configuration overrides the previous one.


Example

  • Configure the LDAP protocol to run in the management VRF.
admin@Xorplus# set system aaa ldap vrf mgmt-vrf
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.