There are two examples of MSTP configuration. In our first example, VLAN 100 is mapped to MSTI-1 and VLAN 200 is mapped to MSTI-2. The entire topology belongs to only one MSTP domain named region1. Switch A is the root of the network.

To achieve load balancing, VLAN 100 should be in MSTI-1 (Fig. 4-4), and VLAN 200 should be in MSTI-2 (Fig. 4-5).

Figure 4-3. MSTP configuration.

Figure 4-4. MSTI-1 topology for VLAN 100.

Figure 4-5. MSTI-2 topology for VLAN 200.

Configuring Switch A, Example 1

For Switch A, configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100 and VLAN 200.

admin@XorPlus# set vlans vlan-id 100
admin@XorPlus# set vlans vlan-id 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100
admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200
admin@XorPlus# set protocols spanning-tree mstp configuration-name region1
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
To make sure that Switch A is the root of the network and the regional root of MSTI-1, configure it as the higher priority.
admin@XorPlus# set protocols spanning-tree mstp bridge-priority 0
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set protocols spanning-tree mstp msti 1 bridge-priority 4096
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configuring Switch B, Example 1

Configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100 and VLAN 200.

admin@XorPlus# set vlans vlan-id 100
admin@XorPlus# set vlans vlan-id 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200
admin@XorPlus#
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100
admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200
admin@XorPlus# set protocols spanning-tree mstp configuration-name region1
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

To verify that Switch B is the regional root of MSTI-2 and that ge-1/1/2 and ge-1/1/3 are in blocking status in MSTI-1, configure a higher MSTI-2 priority and a large value for internal-path-cost in MSTI-1.

admin@XorPlus# set protocols spanning-tree mstp msti 2 bridge-priority 4096
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/2 cost 10000000
admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/3 cost 10000000
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configuring Switch C, Example 1

Configure ge-1/1/1~ge-1/1/2 as trunk ports and as members of VLAN 100 and VLAN 200.

admin@XorPlus# set vlans vlan-id 100
admin@XorPlus# set vlans vlan-id 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200
admin@XorPlus#
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100
admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200
admin@XorPlus# set protocols spanning-tree mstp configuration-name region1
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

To set ge-1/1/1 and ge-1/1/2 in forwarding status in MSTI-1, configure a lower value for internal-path-cost.
To set ge-1/1/1 in blocking status in MSTI-2, configure a higher value for internal-path-cost.

admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/1 cost 1000
admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/2 cost 1000
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set protocols spanning-tree mstp msti 2 interface ge-1/1/1 cost 100000 
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configuring Switch D, Example 1

Configure ge-1/1/1~ge-1/1/2 as trunk ports and as members of VLAN 100 and VLAN 200.

admin@XorPlus# set vlans vlan-id 100
admin@XorPlus# set vlans vlan-id 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200
admin@XorPlus#
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100
admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200
admin@XorPlus# set protocols spanning-tree mstp configuration-name region1
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

To set ge-1/1/1 in blocking status in MSTI-2 and ge-1/1/2 in blocking status in MSTI-1, configure a large value for internal-path-cost.

admin@XorPlus# set protocols spanning-tree mstp msti 2 interface ge-1/1/1 cost 10000000
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/2 cost 10000000
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configuring Switch E, Example 1

Configure ge-1/1/1~ge-1/1/2 as trunk ports and as members of VLAN 100 and VLAN 200.

admin@XorPlus# set vlans vlan-id 100
admin@XorPlus# set vlans vlan-id 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200
admin@XorPlus#
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100
admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200
admin@XorPlus# set protocols spanning-tree mstp configuration-name region1
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

To set ge-1/1/1 and ge-1/1/2 in forwarding status in MSTI-2, configure a lower value for internal-path-cost.
To set ge-1/1/2 in blocking status in MSTI-1, configure a large value for internal-path-cost.

admin@XorPlus# set protocols spanning-tree mstp msti 2 interface ge-1/1/1 cost 1000
admin@XorPlus# set protocols spanning-tree mstp msti 2 interface ge-1/1/2 cost 1000
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/2 cost 10000000
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

In the second example, there are two regions. In region 1, VLAN 100 is mapped to MSTI-1, VLAN 200 is mapped to MSTI-2, and VLAN 300 is mapped to MSTI-3. In region 2, VLAN 200 is mapped to MSTI-2 and VLAN 400 is mapped to MSTI-4. Switch A is the root of the entire network. The topologies of the VLANs are presented in Fig. 4-6 through 4-10.

Figure 4-6. MSTP configuration.

Figure 4-7. Topology for VLAN 100.

Figure 4-8. Topology for VLAN 200.

Figure 4-9. Topology for VLAN 300.

Figure 4-10. Topology for VLAN 400.

Configuring Switch A, Example 2

For Switch A, configure ge-1/1/1~ge-1/1/2 as trunk ports and as members of VLAN 100, VLAN 200, VLAN 300, and VLAN 400.

admin@XorPlus# set vlans vlan-id 100
admin@XorPlus# set vlans vlan-id 200
admin@XorPlus# set vlans vlan-id 300
admin@XorPlus# set vlans vlan-id 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 400
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100
admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200
admin@XorPlus# set protocols spanning-tree mstp msti 3 vlan 300
admin@XorPlus# set protocols spanning-tree mstp configuration-name region1
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
To verify that Switch A is the root of the network and the regional root of MSTI-1, configure it as the higher priority.
admin@XorPlus# set protocols spanning-tree mstp bridge-priority 0
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set protocols spanning-tree mstp msti 1 bridge-priority 4096
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configuring Switch B, Example 2

Configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100, VLAN 200, VLAN 300, and VLAN 400.

admin@XorPlus# set vlans vlan-id 100
admin@XorPlus# set vlans vlan-id 200
admin@XorPlus# set vlans vlan-id 300
admin@XorPlus# set vlans vlan-id 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 400
admin@XorPlus#
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100
admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200
admin@XorPlus# set protocols spanning-tree mstp msti 3 vlan 300
admin@XorPlus# set protocols spanning-tree mstp configuration-name region1
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

To verify that Switch B is the regional root of MSTI-2 and that ge-1/1/1 is in blocking status in MSTI-3, configure a higher MSTI-2 priority and a large value for internal-path-cost in MSTI-3.

admin@XorPlus# set protocols mstp msti 2 bridge-priority 4096
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols mstp msti 3 interface ge-1/1/1 cost 10000000
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configuring Switch C, Example 2

Configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100, VLAN 200, VLAN 300, and VLAN 400.

admin@XorPlus# set vlans vlan-id 100
admin@XorPlus# set vlans vlan-id 200
admin@XorPlus# set vlans vlan-id 300
admin@XorPlus# set vlans vlan-id 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 400
admin@XorPlus#
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100
admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200
admin@XorPlus# set protocols spanning-tree mstp msti 3 vlan 300
admin@XorPlus# set protocols spanning-tree mstp configuration-name region1
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

To verify that Switch C is the regional root of MSTI-3, ge-1/1/1 is in blocking status in MSTI-2, and ge-1/1/2 is in blocking status in MSTI-1, user should configure a higher MSTI-3 priority and large values for internal-path-costs of ge-1/1/1 in MSTI-2 and ge-1/1/2 in MSTI-1.

admin@XorPlus# set protocols spanning-tree mstp msti 3 bridge-priority 4096
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 2 interface ge-1/1/1 cost 10000000
admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/2 cost 10000000
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configuring Switch D, Example 2

Configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100, VLAN 200, VLAN 300, and VLAN 400.

admin@XorPlus# set vlans vlan-id 100
admin@XorPlus# set vlans vlan-id 200
admin@XorPlus# set vlans vlan-id 300
admin@XorPlus# set vlans vlan-id 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 400
admin@XorPlus#
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200
admin@XorPlus# set protocols spanning-tree mstp msti 4 vlan 400
admin@XorPlus# set protocols spanning-tree mstp configuration-name region2
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

To verify that Switch D is the regional root of MSTI-2 and the root of CIST. Configure a higher MSTI-2 priority and bridge priority.

admin@XorPlus# set protocols spanning-tree mstp bridge-priority 16384
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set protocols spanning-tree mstp msti 2 bridge-priority 4096
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configuring Switch E, Example 2

Configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100, VLAN 200, VLAN 300, and VLAN 400.

admin@XorPlus# set vlans vlan-id 100
admin@XorPlus# set vlans vlan-id 200
admin@XorPlus# set vlans vlan-id 300
admin@XorPlus# set vlans vlan-id 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 400
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 300
admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 400
admin@XorPlus#
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200
admin@XorPlus# set protocols spanning-tree mstp msti 4 vlan 400
admin@XorPlus# set protocols spanning-tree mstp configuration-name region2
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

To verify that Switch E is the regional root of MSTI-4. Configure a higher MSTI-4 priority.

admin@XorPlus# set protocols spanning-tree mstp msti 4 bridge-priority 4096
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Browser not supported