set protocols snmp v3 usm-user authentication-key

The set protocols snmp v3 usm-user authentication-key command configures a authentication key for a user.

Command Syntax
set protocols snmp v3 usm-user <user-name> authentication-key <authentication-key>

delete protocols snmp v3 usm-user <user-name> authentication-key

Parameter

Parameter	Description
usm-user <user-name>	Specifies the name of a user. The value is a string.
authentication-key <authentication-key>	Specifies the authentication key for a user. The value is a string that should be no less than 8 characters.

Example

•This example configures a authentication-key for a user.

admin@XorPlus# set protocols snmp v3 usm-user user1 authentication-key u1111key  
admin@XorPlus# commit

PICOS-4.4.5_Configuration_Guide