The set protocols arp interface address mac-address command configures a static ARP entry.

Command Syntax
set protocols arp interface <interface> address <ipv4-addr> mac-address <mac-addr>
delete protocols arp interface <interface> address <ipv4-addr> mac-address <mac-addr>

Parameter

Parameter	Description
interface <interface>	Specifies the outbound interface in a static ARP entry. The value could be the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name.
address <ipv4-addr>	Specifies the IPv4 address in a static ARP entry.
mac-address <mac-addr>	Specifies the MAC address in a static ARP entry.

Example

Configure a static ARP entry that maps the IP address 10.10.60.1 to the MAC address 22:11:11:11:11:11.

admin@XorPlus# set protocols arp interface vlan4 address 10.10.60.1 mac-address 22:11:11:11:11:11
admin@XorPlus# commit

Browser not supported