The set l3-interface routed-interface router-mac command sets the router MAC address of the anycast gateway on a routed interface or sub-interface.

Command Syntax

set l3-interface routed-interface <interface-name> router-mac <macaddr>

Parameter

Parameter	Description
routed-interface <interface-name>	Specifies a routed interface name or sub-interface name. The value is a string.
router-mac <macaddr>	Specifies the virtual MAC address of anycast gateway. The value is a string in xx:xx:xx:xx:xx:xx format where x is a hexadecimal number.

Example

admin@Xorplus# set l3-interface routed-interface rif-te3 router-mac 00:00:10:00:00:FE
admin@Xorplus# commit

Browser not supported