set poe interface priority

The set poe interface priority command configures PoE priority on all the ports or on a specific ethernet port.

Command Syntax

On AS4610-30P, AS4610-54P, AS4630-54PE, S5810-48TS-P, S5860-24MG-U, S5860-48XMG-U, S3410L-24TF-P, S3410-24TS-P, and S3410C-8TMS-P:

set poe interface {<port-id> | all} priority <critical | high | medium | low>

On other PoE supported switches: 

set poe interface {<port-id> | all} priority <critical | high | low>

Parameter

Usage Guidlines

Configuration on a specific port has a higher priority than that of global configuration. For example, if the global configuration of PoE priority is set to high, while PoE priority on a specific port is set to critical, then PoE priority on this specific port is critical, other ports are high.

If a port is set as higher priority and a situation arises where there is not sufficient power for all the PoE ports, the available power is directed to the higher priority port(s). If the switch needs to shut down powered devices because a power supply fails and there is insufficient power, low priority devices are shut before high priority powered devices. Thus, security cameras, emergency phones, and other high priority devices should be set to a high priority.

Example

This example is to configure priority critical on all the ports and ge-1/1/1:

admin@XorPlus# set poe interface all priority critical
admin@XorPlus# commit
   
admin@XorPlus# set poe interface ge-1/1/1 priority critical
admin@XorPlus# commit