The run show mvrp interface command is used to view MVRP information on a specific interface, including MVRP Status, Registrar State, Timers and VLANs learned by the interface through MVRP.

Command Syntax

run show mvrp interface <interface-name>

Parameter

Parameter	Description
interface <interface-name>	Specifies an interface name that enabled MVRP. The value could be a physical interface or a LAG interface.

Example

View the configuration information of MVRP.

admin@PICOS# run show mvrp interface te-1/1/21  
Port            Leave Timer(ms)  LeaveAll Timer(s)  Join Timer(ms)
te-1/1/21       1000             10                 200 

Port            Vlans Added
te-1/1/21       10, 11

Browser not supported