Installing and Removing License for PICOS go2cli Version

Owned by Tracy Yang
Nov 18, 2024
1 min read

Installing License under CLI Operation Mode

The following steps describe how to install a license under CLI operation mode for PICOS go2cli version.

Step 1    Before loading a license, upload the license file to the device. The following example uploads the license file 10GE-SITE-PICA8.lic  to the default path.

By default, the TFTP downloaded file is saved in directory /cftmp/.

admin@PICOS> file tftp get remote-file /tftp/license/10GE-SITE-PICA8.lic local-file 10GE-SITE-PICA8.lic ip-address 10.10.50.22

Step 2    Run the license install <file-name> command to install the license.

admin@PICOS> license install /cftmp/10GE-SITE-PICA8.lic

When the license has been successfully installed, it will display the following information:

License successfully added, the switch need to be rebooted to activate the license.

Step 3    Reboot the switch or restart PICOS to activate the license. Choose either one:

  • Reboot the switch

admin@PICOS> request system reboot

  • Restart PICOS service

Step 4    After PICOS starts up, run the license show command to view the license information.

Removing License under CLI Operation Mode

The following steps describe how to remove a license under CLI operation mode for PICOS go2cli version.

 

Copyright © 2024 Pica8 Inc. All Rights Reserved.