set l3-interface tunnel tunnel-mode gre-ip

Owned by Tracy Yang
Nov 18, 2024
1 min read

Run the command set l3-interface tunnel tunnel-mode gre-ip to configure the tunnel mode. Currently only GRE tunnel type is supported by PICOS.

To delete this configuration, run the command delete l3-interface tunnel tnl4 tunnel-mode gre-ip. 


Command Syntax

set l3-interface tunnel <tunnel-name> tunnel-mode gre-ip

delete l3-interface tunnel <tunnel-name> tunnel-mode 


Parameter

Parameter

Description

tunnel <tunnel-name>

Specifies the tunnel name, in alpha numeric format with no spaces.


Example

  •  Set the tunnel mode of tunnel tnl4 to gre-ip.
admin@XorPlus# set l3-interface tunnel tnl4 tunnel-mode gre-ip
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.