The run clear mvrp interface statistics command is used to clear the MVRP packets statistics.

NOTE:

The previous statistics cannot be restored after clearing, so be careful when using this command.

Command Syntax

run clear mvrp interface <interface-name> statistics

Parameter

Parameter	Description
interface <interface-name>	Specifies an interface name that enabled MVRP. The value could be a physical interface or a LAG interface.

Example

Clear the statistics information of MVRP.

admin@PICOS# run clear mvrp interface te-1/1/7 statistics
admin@PICOS# run show mvrp interface te-1/1/7 statistics
packet_received: 0
packet_sent:    0

Browser not supported