The set protocols bgp neighbor addpath-tx-all-paths command advertises all known paths to a neighbor.
The delete protocols bgp neighbor addpath-tx-all-paths command disables the additional path feature.
Command Syntax
set protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <bgppeer> addpath-tx-all-paths
delete protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <bgppeer> addpath-tx-all-paths
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor <bgppeer> | Specifies the IP address of a peer or a Peer-Group. |
Example
• This example advertises all known paths to a neighbor.
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 addpath-tx-all-paths admin@XorPlus# commit