The set routing route-map action src command sets the preferred source address for matching routes when installing in the kernel.
The delete routing route-map action src command restores the default behavior of not modifying the source address of the route entry.
Command Syntax
set routing route-map <route-map-name> <NUMBER> action src {<ipv4-address>|<ipv6-address>}
delete routing route-map <route-map-name> <NUMBER> action src {<ipv4-address>|<ipv6-address>}
Parameter
Parameter | Description |
route-map <route-map-name> | Specifies the name of the route map. Required. |
<NUMBER> | Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535. |
src {<ipv4-address>|<ipv6-address>} | Specifies the preferred source address to be set for a route. |
Example
- Configure a action clause in the route map to modify the source address of the route:
admin@Xorplus# set routing route-map GlobalMap 10 action source address 100.100.100.1 admin@Xorplus# commit