...
set protocols bgp [vrf <vrf-name>] neighbor <protocol bgppeer><bgppeer>disable-connected-check
delete protocols bgp [vrf <vrf-name>] neighbor <protocol bgppeer> <bgppeer> disable-connected-check
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor |
| <bgppeer> | Specifies |
| the IP address of |
| a peer. |
Example
• This example allows peerings between directly connected eBGP peers using loopback addresses.
...