The set protocols bgp neighbor disable-connected-check command allows peerings between directly connected eBGP peers using loopback addresses.
The delete protocols bgp neighbor disable-connected-check command doesn't allow peerings between directly connected eBGP peers using loopback addresses.
Command Syntax
set protocols bgp [vrf <vrf-name>] neighbor <bgppeer> disable-connected-check
delete protocols bgp [vrf <vrf-name>] neighbor <bgppeer> disable-connected-check
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor <bgppeer> | Specifies the IP address of a peer. |
Example
• This example allows peerings between directly connected eBGP peers using loopback addresses.
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 disable-connected-check admin@XorPlus# commit