You can compare running configurations with initial configurations on the same switch.
...
Comparing configurations on different switches
Comparing configurations on imported switches
Comparing configurations on disconnected switches (switches can’t connect with the AmpCon-DC server)
Prerequisites
Checking Check the Mgmt IP column on the “Switch” page, and ensure that the switch to compare is connected.
√: The switch is disconnected.
x: The switch is connected.
...
In the SN drop-down list, select Running Config(set format) or Running Config(all set format).
Running Config(set format): Displays configurations as the show | display set command result in the switch
Running Config(all set format): Displays configurations as the show all | display set command result in the switch
Then, you can see differences between the running configurations and the initial configurations on the switch.
...