Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 14 Next »

You can compare running configurations with initial configurations on the same switch.

  • Initial configurations

Configurations that you selected when you add a switch configuration, including the global configuration file and the configuration template

  • Running configurations

Configurations that are currently running on the switch

Note: This feature doesn’t support the following scenarios:

  • Comparing configurations on different switches

  • Comparing configurations on imported switches

  • Comparing configurations on disconnected switches (switches can’t connect with the AmpCon-DC server)

Prerequisites

  • Checking the Mgmt IP column on the “Switch” page, and ensure that the switch to compare is connected.

    • √: The switch is disconnected.

    • x: The switch is connected.

图片-20250107-065100.png
  • Ensure that the switch to compare is not in Imported status on the “Switch” page.

Procedure

  1. In the AmpCon-DC UI, click Service > Config Template.

  2. In the SN field, click Select.

图片-20241227-061447.png
  1. In the pop-up window, select the switch to compare.

图片-20241227-061815.png
  1. In the Template field, click Select.

  2. In the pop-up window, select the global configuration file and the configuration template that you pushed to the switch during the initial switch deployment process. Then, click Generate.

图片-20241227-062031.png
  1. In the SN drop-down list, select Running Config(set format) or Running Config(all set format). Then, you can see differences between the running configurations and the initial configurations on the switch.

图片-20241227-063339.png

  • No labels