...
The Hardware ID of the switch to provision has been added to the AmpCon-DC license. For more information, see Preparing Licenses.
You have completed step 1 to 7 in Deploying White-Box Switches.
You have completed step 1 to 5 in Deploying Integrated Hardware and Software Switches.
You have installed a DHCP server and added configurations as follows to the DHCP configuration file (/etc/dhcp/dhcpd.conf):
Replace
- For white-box switches, refer to the following configuration example:
“10.10.51.4”
...
is the IP address that you want to assign to the switch.
...
“10.56.20.180”
...
is the IP address of the AmpCon-DC server.
...
- For integrated hardware and software switches, refer to the following configuration example:
“10.10.51.198” is the IP address that you want to assign to the switch.
“10.56.20.184” is the IP address of the AmpCon-DC server.
...
Provisioning a White-Box Switch
...