...
ZTP relies on the DHCP service, and thus you need to configure DHCP first. After you plug in and reboot the a switch, DHCP automatically provides the switch with an IP address and the address of a provision shell script that is obtained from AmpCon-DC server. The Then, the switch automatically runs execute the script to find shell script to complete the ZTP deployment.
The ZTP deployment for white-box switches and integrated hardware and software switches are different:
White-box switches: Download a PicOS image, install PicOS and its license, register with the AmpCon-DC server,
...
update switch configurations, and reboot the switch.
Integrated hardware and software switches: Register with the AmpCon-DC server, install a PicOS license on the switch, update switch configurations, and reboot the switch.
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
The Hardware ID of the switch to provision has been added to the AmpCon-DC license. For more information, see Preparing Licenses.
You have completed For white-box switches, step 1 to 7 in Deploying White-Box Switches have been completed.
You have completed For integrated hardware and software switches, step 1 to 5 in Deploying Integrated Hardware and Software Switches have been completed.
You have installed a DHCP server and added configurations as follows to the DHCP configuration file (/etc/dhcp/dhcpd.conf):
...