Page Comparison

The run show poe interface command displays the PoE status of all the ports or on a specific ethernet port.

...

Item	Description
Port	Port ID.
Status	Indicates that PoE function status, the value could be Disabled, Searching, Delivering, Test, Requesting and Fault.
Consume	Indicates the power consumption of port.
Reserved	Indicates the power allocated. When PoE over LLDP power negotiation is enabled, it shows the negotiated power. When PoE over LLDP power negotiation is disabled, If mangement mode is dynamic, the allocated power is same to the consumption power on AS4610-30P, AS4610-54P, AS4630-54PE and AS4630-54NPE, the allocated power is the configured max-power on N3048EP-ON. If mangement mode is static, the allocated power is the configured max-power on AS4610-30P, AS4610-54P, AS4630-54PE , and AS4630-54NPE and N3048EP-ON.
Pair	Indicates PoE pair mode. A: signal, deliver power with data transmit cable. B: spare, deliver power with spare cable.
PD_Type	Indicates powered device type, the value could be None, IEEE, Pre-Standard and Extended.
PD_Class	Indicates the PD class, the value could be 1, 2, 3, 4.
Detection_Type	Indicates PoE detection type, the value could be: no detection Legacy Capacitive Detection only IEEE 802.3af 4-Point Detection only IEEE 802.3af 4-Point followed by Legacy IEEE 802.3af 2-Point Detection IEEE 802.3af 2-Point followed by Legacy

Versions Compared