Versions Compared

Version Old Version 13 New Version Current
Changes made by

Tracy Yang

Tracy Yang

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Command Syntax

set routing prefix-list IPv4 <ip{ipv4-family <ipv4-prefix-name> | ipv6-family <ipv6-prefix-name> >} [seq <sequence-number>] {deny|permit} {prefix <ipv4/prefixlen> [ge <greater-equal-value>] [le <less-equal-value>] | prefix-any}

delete routing prefix-list IPv4 <ip-list {ipv4-family <ipv4-prefix-name> | ipv6-family <ipv6-prefix-name> >} [seq <sequence-number>]deny|permit} {prefix <ipv4/prefixlen> [ge <greater-equal-value>] [le <less-equal-value>] | prefix-any}

...

Parameter

Parameter

Description

<ipip4-prefix-name>

Specifies the name of an IPv4 prefix list.
<ip6-prefix-name>Specifies the name of an IPv6 prefix list.

seq <sequence-number>

Optional. Specifies the sequence number of an entry in the IPv4 prefix list. The value is an integer that ranges from 1 to 4294967295.
{deny|permit}

Specifies whether the route is available for further processing when there is a match. The value could be deny or permit.

  • deny: In deny mode, if the IP address to be filtered is within the defined prefix range, the IP address fails to match the routing policy and cannot match the next entry.
  • permit:  In permit mode, if the IP address to be filtered is within the defined prefix range, the IP address matches the routing policy and does not continue to match the next entry. 

{prefix <ipv4/prefixlen> | prefix-any}

Specifies an IP address/prefix length or all addresses. The value of prefix length is an integer that ranges from 0 to 32.

When prefix-any is specified, it creates a prefix-list that matches all addresses.

ge <greater-equal-value>

Optional. Specifies the lower threshold of the mask length. It can be used when an IP address/prefix length is specified.

If ge greater-equal-value and le less-equal-value are not specified, the value of mask-length is the mask length.

greater-equal-value must meet the following requirement: prefixlen ≤ greater-equal-value ≤ less-equal-value ≤ 32.

If only ge is configured, the mask ranges from greater-equal-value to 32.

le <less-equal-value>

Optional. Specifies the upper threshold of the mask length. It can be used when an IP address/prefix length is specified.

If ge greater-equal-value and le less-equal-value are not specified, the value of mask-length is the mask length.

less-equal-value must meet the following requirement: prefixlen ≤ greater-equal-value ≤ less-equal-value ≤ 32.

If only le is configured, the mask ranges from prefixlen to less-equal-value.

...

Code Block
admin@Xorplus# set routing prefix-list IPv4ipv4-family p1 seq 1 permit prefix 35.0.0.0/8 ge 16
admin@Xorplus# commit

...