For switches that have been are deployed but not deployed with AmpCon™AmpCon-DC, you can import these switches so that they can be managed by AmpCon-DC.
Prerequisites
The switches to import be imported haven’t been managed by AmpCon-DC.
The Hardware IDs of the switches to import be imported have been added to the AmpCon-DC license. For more information, see Preparing Licenses.
...
In the AmpCon-DC UI, click Service > Switch.
Click Import Actions, and then select Import.
In the IP field, enter the IP address of the switch.
In the System Config drop-down list, select the appropriate system configuration.
Note: The selected system configuration needs to contain the default username and password of the switch.
...
In the Fabric drop-down list, select a fabric. To add a fabric, see Managing Fabrics.
Click OK.
Optional: In the AmpCon-DC UI, click Service > Switch. Check whether the switch status is shown as Imported.
...
In the AmpCon-DC UI, click Service > Switch.
Click Import Actions, and then select Import.
In the IP field, enter the IP address of the switch.
In the System Config drop-down list, select the appropriate system configuration.
Note: The selected system configuration needs to contain the default username and password of the switch.
In the Fabric drop-down list, select a fabric. To add a fabric, see Managing Fabrics.
In the Group drop-down list, select a group. To add a group, see Managing Groups.
...
Click OK.
Optional: In the AmpCon-DC UI, click Service > Switch. Check whether the switch status is shown as Imported.