/
Configuring the Syslog Disk and Syslog Host

Configuring the Syslog Disk and Syslog Host

Owned by Tracy Yang (Unlicensed)
Last updated: Jan 27, 2019

 

Configuring the Syslog Host

After you configure the syslog server IP address, the log files will be sent to the syslog server.

admin@XorPlus# set system syslog server-ip 192.168.1.1 ?
Possible completions:
  <[Enter]>                     Execute this command
  port                          Remote syslog server port
  protocol                      Remote syslog server protocol
admin@XorPlus# set system syslog server-ip 192.168.1.1 protocol udp
admin@XorPlus# commit 
Commit OK.
Save done.
admin@XorPlus#
  • Configuration of nodes "system syslog host", "system syslog port-number", and "system syslog port-protocol" have been deprecated in version 2.4.
  • It is recommended to configure UDP protocol as the port protocol.

 

Configuring Syslog for Local Storage

You can configure syslog messages to be stored in RAM or in a local SD card.

XorPlus# set system syslog local-file disk
XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
XorPlus#
XorPlus# set system syslog local-file ram
XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
XorPlus#

 

 

Copyright © 2025 Pica8 Inc. All Rights Reserved.