/
Configuring SSH and Telnet Parameters

Configuring SSH and Telnet Parameters

Owned by Tracy Yang (Unlicensed)
Dec 16, 2018

 

Configuring the SSH Connection Limit

admin@XorPlus# set system services ssh protocol-version v2 
admin@XorPlus# set system services ssh connection-limit 5
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Disabling Telnet Service

admin@XorPlus# set system services telnet disable true
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Enabling and Disabling Inband Service

By default, SSH and telnet with inband interfaces are disabled. You can enable inband services by entering the command below.

admin@XorPlus# set system inband enable true
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configure the Idle Timeout for SSH User

admin@Xorplus# set system services ssh idle-timeout 60
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Related content

Copyright © 2025 Pica8 Inc. All Rights Reserved.