The set routing route-map match source-vrf command matches the source VRF attribute of the route with route configured in the match clause.
The delete routing route-map match source-vrf command restores the default behavior of not matching the source VRF attribute of the route.
Command Syntax
set routing route-map <route-map-name> <NUMBER> match source-vrf <source-vrf>
delete routing route-map <route-map-name> <NUMBER> match source-vrf <source-vrf>
Parameter
Parameter | Description |
route-map <route-map-name> | Specifies the name of the route map. Required. |
<NUMBER> | Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535. |
source-vrf <source-vrf> | Specifies if the source VRF attribute is matched with a match clause. |
Example
- Configure a match clause in the route map to match the source VRF:
admin@Xorplus# set routing route-map GlobalMap 10 match source VRF VRF-east admin@Xorplus# set routing route-map GlobalMap 10 action permit admin@Xorplus# commit