The set protocols bgp neighbor send-community command enables community and/or extended community exchange with the specified neighbor. When this command is configured for the peer-group, then all the neighbors that are part of peer-group will send the community values to the peers.
The delete protocols bgp neighbor send-community command will not allow the neighbor to send community values to the specific neighbors that are part of peer-group.
Command Syntax
set protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <bgppeer> send-community [both|extended|standard|large|all]
delete protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <bgppeer> send-community [both|extended|standard|large|all]
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor <bgppeer> | Specifies the IP address of a peer or a Peer-Group. |
| [both|extended|standard|large|all] | Optional. The parameters standard, large and extended send only the respective community numbers. all: both standard and extended communities will be sent to the neighbor. |
Example
• This example allows community values to be sent to a specific neighbor.
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 send-community both admin@XorPlus# commit