The set protocols bgp neighbor send-community command enables community and/or extended community exchange with the specified neighbor. When this command is configured for the peer-group, then all the neighbors that are part of peer-group will send the community values to the peers. The parameters standard and extended send only the respective community numbers. When the command is issued with parameter all, both standard and extended communities will be sent to the neighbor.
The delete protocols bgp neighbor send-community command will not allow the neighbor to send community values to the specific neighbors that are part of peer-group.
Command Syntax
set protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <bgppeer> send-community [both|extended|standard|large|all]
delete protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <bgppeer> send-community [both|extended|standard|large|all]
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor <bgppeer> | Specifies the IP address of a peer. |
Example
• This example allows community values to be sent to a specific neighbor.
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 send-community both admin@XorPlus# commit