The run show poe power command displays the PoE power status.
Note:
On AS4610-30P, AS4610-54P, AS4630-54PE, AS4625-54P and AS4630-54NPE,
- If Power Management mode is dynamic, total power allocated is about the same value as realtime consumption.
- But if Power Management mode is static, total power allocated is usually larger than realtime consumption.
On other PoE supported switches, regardless of whether Power Management mode is dynamic or static, the total power allocated is about the same value as realtime consumption.
Example
• Displays the PoE power status.
On AS4610-30P, AS4610-54P, AS4630-54PE, AS4625-54P, AS4630-54NPE, S5860-24XB-U, S5810-48TS-P, S5860-24MG-U and S5860-48XMG-U:
admin@XorPlus# run show poe power Total power allocated RealTime consumption Power available Power Mode PSU1 Status PSU2 Status ------------------------------------------------------------------------------------------------------------------------ 2.20W 2.20W 675.00W redundant Powered on Present but powered off
On other PoE supported switches:
root@Xorplus# run show poe power Consumption Power Calculated Power Available Power PSU1 Status PSU2 Status ------------------------------------------------------------------------------------------------------------- 0W 0W 950W Not present Powered on
Table 1 Description of the run show poe power command output
Item | Description |
Total power allocated | Total allocated max power for all ports. |
RealTime consumption | The actual consumption power of all ports. |
Power available | The max limit power value of PSE. |
Consumption Power | The actual power consumed by all ports. |
Calculated Power | The sum of all ports power, allocated as defined by IEEE standard 802.3af-2003, or actually consumed. |
Available Power | The max limit power value of PSE. |
Power Mode | Redundant or aggressive based on set. |
PSU1 Status | Status of PSU1. |
PSU2 Status | Status of PSU2. |