The run show igmp mroute command displays the PIM routing table information.
Command Syntax
run show igmp mroute [vrf <vrf-name>]
Parameter
| Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
Example
- Display the PIM routing table.
admin@XorPlus# run show mroute
IP Multicast Routing Table
Flags: S - Sparse, C - Connected, P - Pruned
R - RP-bit set, F - Register flag, T - SPT-bit set
Source Group Flags Proto Input Output TTL Uptime
71.1.1.100 231.1.1.1 SFP none vlan771 none 0 --:--:--
81.1.1.100 231.1.1.1 SCT IGMP vlan4000 vlan771 1 00:03:57