Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 10 Next »

After you add a switch configuration, you must stage the switch to make it ready for Zero Touch Provisioning (ZTP).

Procedure

  1. In the AmpCon™-DC UI, click Service > Switch.

  2. In the Switch list, locate the switch, and then click Stage.

图片-20241224-040338.png

  1. Optional: Click Service > Switch, and check whether the switch status is shown as Staged.

图片-20241224-040809.png

After you stage the switch, you can continue to provision new switches with ZTP.

  • No labels

Copyright © 2025 Pica8 Inc. All Rights Reserved.