The set protocols ethernet-oam interface remote-loopback supported command enables reactions to loopback control OAMPDUs from peers.
The delete protocols ethernet-oam interface remote-loopback supported command deletes the configuration.
NOTE: Only after the responding end has been configured with this command to enable reactions to loopback control OAMPDUs from peers can the peer end run the command ethernet-oam remote-loopback start interface <interface-name> to start the EFM OAM remote loopback tests. |
Command Syntax
set protocols ethernet-oam interface <interface-name> remote-loopback supported
delete protocols ethernet-oam interface <interface-name> remote-loopback supported
Parameter
Parameter | Description |
interface <interface-name> | Specifies an interface name. The value could be a physical interface, for example, ge-1/1/1, xe-1/1/2, and so on. |
Example
Enable reactions to loopback control OAMPDUs from peers.
admin@PICOS# set protocols ethernet-oam interface xe-1/1/2 remote-loopback supported admin@PICOS# commit