Front Panel Schematic
(1) Status LED | (2) MGMT LED | (3) PWR1 LED |
(4) PWR2 LED | (5) FAN LED | (6) LED Mode (LED) |
(7) LED Mode (button) | (8) RJ45 10G port | (9) SFP+ 10G port |
(10) SFP28 25G port | (11) QSFP+ 40G port | - |
Rear Panel Schematic
(1) RJ45 Management port | (2) Console port | (3) USB port |
(4) PS1 (Power Supply) | (5) PS2 | (6) FAN1 |
(7) FAN2 | (8) FAN3 | - |
Switch System Characteristics
Mechanical dimension (W x D x H) | 442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.) |
RJ45 10G port | 48 |
RJ45 10G port LED | 48 x 1 |
RJ45 10/100/1G Management port | 1 |
Console port | 1 |
USB port | 1 |
SFP28 25G port | 4 |
SFP28 25G port LED | 4 x 1 |
PoE and LED Mode Button
The first 48 x 10G RJ45 ports on the front panel support PoE, only the first 24 x 10G RJ45 ports on the front panel support UPoE. For these UPoE ports, the maximum output power supported is up to 90 watts. For other PoE ports, the maximum output power supported is 30 watts.
LED Mode button on the front panel controls whether the port LED indicates data switching status or PoE power supply status of the first 48 ports.
By default, port LED indicates data switching status of the port. LED Mode LED on the front panel of system LED block is solid green.
If pressed the LED Mode button, the port LED indicates PoE power supply status of the port. LED Mode LED on the front panel of system LED block changes to solid amber.