run show poe power

This command is applied on AS4610-30P, AS4610-54P, AG6248C, N3132PX and N3048EP-ON.

The run show poe power command displays the PoE power status.

Note:

On AS4610-30P and AS4610-54P,

If Power Management mode is dynamic, total power allocated is about the same value as realtime consumption.
But if Power Management mode is static, total power allocated is usually larger than realtime consumption.

On AG6248C, N3132PX and N3048EP-ON, regardless of whether Power Management mode is dynamic or static, the total power allocated is about the same value as realtime consumption.

Example

The command format is exactly same on AS4610-30P, AS4610-54P, AG6248C, N3132PX and N3048EP-ON, while the results of show are different.

• Displays the PoE power status.

On AS4610-30P, AS4610-54P, N3132PX and N3048EP-ON:

admin@XorPlus# run show poe power
Total power allocated           RealTime consumption     Power available   Power Mode    PSU1 Status    PSU2 Status 
------------------------------------------------------------------------------------------------------------------------
2.20W                           2.20W                     675.00W         redundant       Powered on          Present but powered off

On AG6248C:

root@Xorplus# run show poe power 
Consumption Power  Calculated Power  Available Power    Power Mode      PSU1 Status            PSU2 Status 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
0W                   0W                950W             redundant       Not present            Powered on

Table 1 Description of the run show poe power command output

Item	Description
Total power allocated	Total allocated max power for all ports.
RealTime consumption	The actual consumption power of all ports on AS4610-30P and AS4610-54P.
Power available	The max limit power value of PSE on AS4610-30P and AS4610-54P. When the power mode is redundant, Power available is 675W. When the power mode is aggressive, Power available is 1350W.
Consumption Power	The actual power consumed by all ports on AG6248C and N3048EP-ON.
Calculated Power	The sum of all ports power, allocated as defined by IEEE standard 802.3af-2003, or actually consumed.
Available Power	The max limit power value of PSE on AG6248C and N3048EP-ON. When the power mode is redundant, Power available is 950W. When the power mode is aggressive, Power available is 1900W.
Power Mode	Redundant or aggressive based on set.
PSU1 Status	Status of PSU1.
PSU2 Status	Status of PSU2.