The run show vrrp command displays the configuration information of VRRP group.

NOTE:

This command applies to both VRRPv2 and VRRPv3 configuration.

Command Syntax

run show vrrp <interface-name>

Parameter

Parameter	Description
<interface-name>	Optional. Specifies the Layer 3 interface name of VRRP device. The value is a string.

Example

Run run show vrrp command to view the configuration information of VRRP group.

admin@XorPlus# run show vrrp vlan100
Interface: vlan100
Vif: vlan100
VRID: 1
Version:                      3
Accept:  disable
Load-balance: enable
State: Master
Master IP: 192.168.1.1
Virtual MAC: 00:00:5e:00:01:01
Preempt: enable
Adver Interval: 1 
Priority: 250 
Virtual IP: 192.168.1.5

Browser not supported