interface aggregate-ethernet <lag_name>

Use this command to create a Link Aggregation Group (LAG) interface.

Command Syntax

set interface aggregate-ethernet <lag_name>

Parameter

<lag_name>  Enter the name of the LAG interface.

NOTE:

Before PicOS 2.9.2, the maximum number of LAGs is 48 on all models, that is, PicOS supports to configure LAG as ae1 to ae48 on all models.

In PicOS 2.9.2 and the later versions, the maximum number of LAGs is equal to the maximum number of physical interfaces by each model from ae1.

The maximum number of LAGs supported by each model is as follows:

Example

The example creates a LAG named ae4.

admin@XorPlus# set interface aggregate-ethernet ae4 
admin@XorPlus# commit