/
Importing an External Route into an OSPF Area

Importing an External Route into an OSPF Area

Owned by Tracy Yang (Unlicensed)
Dec 05, 2019




                                            Figure 5-8. Importing an external route into an OSPF area.


Configuring Switch A

admin@XorPlus# set vlans vlan-id 500 l3-interface vlan-500 
admin@XorPlus# set vlan-interface interface vlan-500 vif vlan-500 address 192.168.1.2 prefix-length 30
admin@XorPlus# set interface gigabit-ethernet ge-1/1/47 family ethernet-switching native-vlan-id 500 
admin@XorPlus# set protocols ospf4 router-id 1.1.1.1 
admin@XorPlus# set protocols ospf4 area 0.0.0.0 interface vlan-500 vif vlan-500 address 192.168.1.2 
admin@XorPlus#commit
Waiting for merging configuration.
Commit OK.
Save Done.
admin@XorPlus#


Configuring Switch B

admin@XorPlus# set vlans vlan-id 400 l3-interface vlan-400 
admin@XorPlus# set vlan-interface interface vlan-400 vif vlan-400 address 172.25.150.250 prefix-length 30
admin@XorPlus# set vlans vlan-id 500 l3-interface vlan-500 
admin@XorPlus# set vlan-interface interface vlan-500 vif vlan-500 address 192.168.1.1 prefix-length 30
admin@XorPlus# set interface gigabit-ethernet ge-1/1/48 family ethernet-switching native-vlan-id 500 
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching native-vlan-id 400
admin@XorPlus# set protocols ospf4 router-id 4.4.4.4
admin@XorPlus# set protocols ospf4 area 0.0.0.0 interface vlan-500 vif vlan-500 address 192.168.1.1
admin@XorPlus# set protocols ospf4 area 1.1.1.1 interface vlan-400 vif vlan-400 address 172.25.150.250
admin@XorPlus#commit
Waiting for merging configuration.
Commit OK.
Save Done.
admin@XorPlus#


Configuring Switch C

admin@XorPlus# set vlans vlan-id 300 l3-interface vlan-300 
admin@XorPlus# set vlan-interface interface vlan-300 vif vlan-300 address 172.25.150.246 prefix-length 30
admin@XorPlus# set vlans vlan-id 400 l3-interface vlan-400 
admin@XorPlus# set vlan-interface interface vlan-400 vif vlan-400 address 172.25.150.249 prefix-length 30
admin@XorPlus# set interface gigabit-ethernet te-1/1/49 family ethernet-switching native-vlan-id 300 
admin@XorPlus# set interface gigabit-ethernet te-1/1/51 family ethernet-switching native-vlan-id 400 
admin@XorPlus# set protocols ospf4 router-id 3.3.3.3
admin@XorPlus# set protocols ospf4 area 2.2.2.2 interface vlan-300 vif vlan-300 address 172.25.150.246 
admin@XorPlus# set protocols ospf4 area 1.1.1.1 interface vlan-400 vif vlan-400 address 172.25.150.249
admin@XorPlus#commit
Waiting for merging configuration.
Commit OK.
Save Done.
admin@XorPlus# 


Configuring an external route import policy on Switch C

  1. Configure external static route.

    admin@XorPlus# set protocols static route 192.168.6.0/24 next-hop 172.25.150.245
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

  2. Configure policy to import external route

    admin@XorPlus# set policy policy-statement static term 1 from protocol static
admin@XorPlus# set policy policy-statement static then accept
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

  3. Use policy on ospf

    admin@XorPlus# set protocols ospf4 export static
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

  4. Check route table on Switch A. There will be route entry 192.168.6.0/24

    admin@XorPlus# run show route forward-route ipv4 all 
Destination       NetMask           NextHopMac          Port    
---------------   ---------------   -----------------   ---------
192.168.1.0       255.255.255.252   C8:0A:A9:AE:0A:66   connected
172.25.150.248    255.255.255.252   60:EB:69:9B:BE:31   te-1/1/47
192.168.6.0        255.255.255.0     60:EB:69:9B:BE:31  te-1/1/47
Total route count:3

Copyright © 2025 Pica8 Inc. All Rights Reserved.