/
Configuring the Syslog Disk and Syslog Host

Configuring the Syslog Disk and Syslog Host

Owned by Tracy Yang (Unlicensed)
Dec 05, 2019

 

Configuring the Syslog Host

After you configure the syslog server IP address, the log files will be sent to the syslog server.

admin@XorPlus# set system syslog server-ip 192.168.1.1 ?
Possible completions:
  <[Enter]>                     Execute this command
  port                          Remote syslog server port
  protocol                      Remote syslog server protocol
admin@XorPlus# set system syslog server-ip 192.168.1.1 protocol udp
admin@XorPlus# commit 
Commit OK.
Save done.
admin@XorPlus#
  • Configuration of nodes "system syslog host", "system syslog port-number", and "system syslog port-protocol" have been deprecated in version 2.4.
  • It is recommended to configure UDP protocol as the port protocol.

 

Configuring Syslog for Local Storage

You can configure syslog messages to be stored in RAM or in a local SD card.

XorPlus# set system syslog local-file disk
XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
XorPlus#
XorPlus# set system syslog local-file ram
XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
XorPlus#

 

 

Copyright © 2025 Pica8 Inc. All Rights Reserved.