This command is applied on AS4610-30P, AS4610-54P, AG6248C, N3132PX and N3048EP-ON.
The set poe interface enable command enables PoE function on all ports or on a specific port.
Command Syntax
set poe interface {<port-id> | all} enable <true | false>
Parameter
Parameter | Description |
interface {<port-id> | all} | Specifies port ID. The value could be ge-1/1/1 to ge-1/1/48, all indicates a global configuration that enable or disable PoE on all ports. |
enable <true | false> | Enable or disable PoE function.
By default, PoE function is disabled. |
Note:
Configuration on a specific port has a higher priority than that of global configuration. For example, if a specific port enables PoE function but the global configuration disables PoE function, then PoE function of all ports is disabled except this specific port.
Example
• This example is to enable PoE on all the ports and ge-1/1/1.
admin@XorPlus# set poe interface all enable true admin@XorPlus# commit admin@XorPlus# set poe interface ge-1/1/1 enable true admin@XorPlus# commit