/
system ntp-server-ip
system ntp-server-ip
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Dec 16, 2018
Loading data...
User can configure the NTP server IP address or delete it. The L2/L3 switch synchronizes with the NTP server only when the configuration commands are committed using the commit command.
Command Syntax
set system ntp-server-ip <IPV4>
delete system ntp-server-ip <IPV4>
Parameter
• <IPV4> It refer to ipv4 address.
Example
• This example demonstrates how to change the NTP server's IP address:
admin@XorPlus# set system ntp-server-ip 192.168.10.100 admin@XorPlus# commit
Copyright © 2025 Pica8 Inc. All Rights Reserved.