interface gigabit-ethernet <port> fec <boolen>

Users can enable or disable forward error correction on ports. Fec works if the follow conditions are satisfied at the same time.

• 100G modules plugged in
• not  breakout into 4 ports
• speed auto or 100Gb/s

The ports can link up when the two connected ports both enable or disable fec at the same time.

Command Syntax
set interface gigabit-ethernet <port> fec <boolen>

Parameter
• <port> ethernet switching port identifier
•<boolen> port speed identifier,values are as follows:

• true enable forward error correction(default)
• false disable forward error correction on the port

Example
• This example disables forward error correction on port xe-1/1/1:

root@XorPlus# set interface gigabit-ethernet xe-1/1/1 fec false
root@XorPlus# commit