VLAN Configuration Commands

This section contains descriptions of the CLI commands that this chapter references.

• set l3-interface vlan-interface router-advertisement
• set l3-interface vlan-interface address prefix-length
• vlans dot1q-tunneling egress from
• vlans dot1q-tunneling egress then action
• vlans dot1q-tunneling egress then service-vlan
• vlans dot1q-tunneling ingress from double-tag service-vlan
• vlans dot1q-tunneling ingress from one-tag customer-vlan-list
• vlans dot1q-tunneling ingress from untag enabled
• vlans dot1q-tunneling ingress then
• vlans vlan-id
• vlans vlan-id description
• set vlans vlan-id l3-interface
• vlans vlan-id vlan-name
• run show l3-interface interface
• show vlans
• run clear l3-interface statistics
• set l3-interface vlan-interface dhcp
• set l3-interface vlan-interface mtu
• set l3-interface vlan-interface rate-limit
• set l3-interface vlan-interface vrf
• set vlans vlan-id private-vlan mode
• set vlans vlan-id private-vlan association
• run show vlans private-vlan
• run show vlans private-vlan type