set protocols dhcp6 relay interface remote-id
- Tracy Yang (Unlicensed)
The set protocols dhcp6 relay interface remote-id command configures the remote ID to be inserted into the DHCPv6 relay packets.
Command Syntax
set protocols dhcp6 relay interface <vlan-interface-name> remote-id <remote-id>
Parameters
Parameter | Description |
interface <vlan-interface-name> | Specifies an L3 VLAN interface name. The value is a string. Its the outbound interface of relay messages. |
remote-id <remote-id> | Specifies the remote ID. The value is a string. |
Usage Guidelines
The Remote ID records user access information in the DHCPv6 packets sent from the clients to the device. When receiving the request packets sent from the DHCPv6 clients and forwarding the packets to the DHCPv6 server, the DHCPv6 relay can insert the Remote ID to the packets to identify the DHCPv6 client location information. The location information can be used by the DHCPv6 server to assign IPv6 addresses and network parameters.
Example
- Configure the remote ID to be inserted into the DHCPv6 relay packets.
admin@Xorplus# set protocols dhcp6 relay interface vlan100 remote-id ubuntuDesktop16.04.6-2
Copyright © 2025 Pica8 Inc. All Rights Reserved.