/
run show pim interface

run show pim interface

Owned by Tracy Yang (Unlicensed)
May 27, 2022

The run show pim interface command shows information about all interfaces on which PIM-SM is enabled.


Command Syntax

run show pim interface [detail]


Example

  • Show information about all interfaces on which PIM-SM is enabled.
admin@Xorplus# run show pim interface
Interface      State        Address    PIM Nbrs     PIM DR       FHR      IfChannels
----------   --------   ------   --------   --------   ----   ---------
loopback    up      1.1.1.1    0           local        0        0
vlan100        up           10.0.0.11  1            10.0.0.21    0        4

Related content

Copyright © 2025 Pica8 Inc. All Rights Reserved.